Engine Failure Hazard Renault [Causes, Solutions & Fix]

If you are a Renault owner, you may find it distressing to see the warning message “Engine Failure Hazard” displayed on your instrument panel.

Your Renault dashboard may appear as if it is warning you of impending doom, but it actually has many different reasons for appearing.

It is within the scope of this article that I will explain what the term “engine failure hazard” means, as well as answer some questions about why it appears, and how to resolve it. Let’s take a look at what needs to be done.

A Renault car contains a warning that reads “Engine Failure Hazard”. Can you please tell me what it means?

An explanation of the Renault engine failure warning

Renault Clio, Traffic, Fluence, Grand Scenic, and Laguna 3 are popular models that display an engine failure hazard warning when the engine control unit (ECU) detects a potential problem. It serves as an alert to the driver that there is an issue that requires attention. This alert comes from the vehicle’s on board diagnostics system.

There are possible issues preventing the engine from running properly, as indicated by this dashboard warning light. A malfunctioning thermostat or oxygen sensor are two examples of more serious causes of this issue, but there are a number of minor causes as well.

When a Renault engine fails, what causes the fault?

This message is displayed on your Renault dashboard if any of the following occurs, based on my years of experience as an auto mechanic:

1. Sensor for catalytic oxygen is faulty

There could be several reasons why your Renault engine is failing. Additionally, repairing it is among the easiest.

Your engine’s exhaust will be able to show you how much oxygen is being expelled by an oxygen sensor. As soon as the oxygen sensors indicate too much or too little fuel and air, the powertrain control module (PCM) tests the combination.

In this way, you can guarantee that all fuel being used in your Renault is used efficiently and correctly. These sensors are at high risk of malfunctioning.

You will see a warning light that says “Engine failure hazard” if either of your sensors is not working properly. It is mainly during warm weather that engines misfire and run poorly if they do not receive enough airflow.

2. Lack of coolant flowing through the radiator due to leaks:

On a Renault, a radiator leak is also a common cause of this problem.

It is unlikely that you will be able to restore the engine’s life if your Renault’s radiator does not receive enough coolant.

This issue is commonly characterized by the following signs:

• While driving, the temperature is high.
• Your exhaust pipe emits white smoke when the engine is started.
• The vents or undercarriage of your car leak coolant

The Renault’s computer will display the engine failure hazard message when your car runs hotter than normal by sending a signal to the radiator when it runs too hot

3. Thermostat Stuck

In your Renault’s cooling system, your thermostat regulates your engine’s temperature, which is a very important part.

The cooling system does this by letting air into the radiator and out again to maintain an even temperature by opening and closing a valve inside the engine’s coolant system.

Renault engines cannot regulate its engine temperature if their thermostat is stuck open. As a result, overheating can occur and the “Engine failure risk” increases.

Keep an eye on the coolant temperature gauge when you get a fault message saying the coolant temp must be maintained. You are probably dealing with a leaking radiator, low coolant in your radiator, or a bad thermostat if the level is too high.

4. Low Engine Oil

The importance of maintaining the correct engine oil level cannot be overstated for me as a mechanic.

When there is not enough oil in Renault, problems may occur because all moving parts are forced to operate without cooling, lubrication, or smooth operation.

I recommend that you check the level of your oil if you have not changed it or changed the oil in a while.

In case of low engine oil, you need to check the level and top it up if it’s too low to cause the engine failure hazard message.

5. Bad Spark Plugs

An engine failure warning message may be displayed when a spark plug is faulty.

In a worn-out spark plug, fuel cannot be ignited as well, and the spark plugs provide the spark that ignites the fuel in the cylinder.

If the engine is underpowered, it runs rough or stalls when it is put to use. As a result, the engine produces less power.

6. Clogged DPF

Clogged DPFs can cause engine failure hazards on Renaults with Diesel engines.

When the diesel particle filter gets clogged, less fuel can be burned efficiently because it traps harmful soot particles from entering the environment.

Consequently, pressure will build up inside the engine, causing a wide range of problems.

7. Failing Fuel Injectors

In a Renault, a failed fuel injector is another common cause of a warning light showing up on the dashboard indicating there is an engine failure hazard.

Fuel injectors spray fuel directly into the engine as the name suggests.

When they fail, the engine can run rough due to misfires causing the engine to run rough. They deliver a precise amount of fuel at precisely the right time.

What To Do If Your Renault Engine Fails?

It is typically necessary to diagnose and resolve the problem that triggered the “Engine Failure Hazard” light before resetting it on a Renault. The following steps will guide you in diagnosing the issue and resetting the warning light:

1. Diagnostic Scan:

• You can perform a diagnostic scan on a vehicle using an OBD2 (Onboard Diagnostics) scanner.
• Under the dashboard, you will usually find the OBD port. Connect the scanner to this port.
• The engine failure hazards warning could be caused by error codes stored in the ECU.

2. Seek professional advice:

• Visit a Renault dealer or certified Renault specialist if you have any problems.
• To figure out exactly what’s wrong, professionals use advanced diagnostic equipment.
• It’s possible that this kind of service can give you accurate information about what’s wrong, how much it’ll cost to fix it, and whether anything needs to be replaced.

3. Provide a specific solution:

• Repairs or replacements recommended by professionals should be followed once the issue has been identified.
• O2 sensors that are misguided, thermostats that are broken, and cooling system issues are not unusual.

4. Turning off the warning light:

• It is possible to reset the “Engine Failure Hazard” warning light after the necessary repairs and replacements have been made using an OBD scanner.
• After the issue has been resolved, the warning light on some motors may automatically turn off, while on others, it may be necessary to manually switch on the scanner in order to clean up the problem.

5. Comply with manufacturer’s instructions:

• The manufacturer can provide guidance on how to re-set the warning light in your car. Refer to the manual for specific instructions.
• The light may need to be reset in a certain order in some cars. However, the specific steps will vary depending on the Renault model and year, although the above offers a general guideline. Model-specific instructions should always be found in the owner’s manual of the vehicle.

Also Read:

• Most Common Problems With 3.0 Duramax
• What Does “Steering Assist Is Reduced Drive With Care” Mean?
• Ways to Fix Key System Error Nissan Altima [Guide]
• Wrench Light On Ford Fusion [Meaning & Solution]
• Ways To Ruin An Engine Without Evidence [Explained]
• Low Washer Fluid Light Won’t Turn Off

Frequently Asked Questions

Conclusion

In conclusion, we have briefly discussed the warnings of engine failure hazards in Renault cars, as well as some possible issues that we should be aware of in order to prevent engine failures. Some additional tips have also been provided for preventing engine failures. Checking your engine efficiency is always a must; if you’re a long-trout traveler still in need of a little guidance.